參數 名稱 說明 初始值
display=X 指示出"你要甚麼?" 此Count.cgi可用來做為"計數器", "時鐘" (當display=clock)或 "日期" (當display=date). 若你想用Count.cgi來做為"計數器", 是不需設 定這個參數的, 因"計數器"為初始值.

注意: display=clock and display=date 僅能與 dd=A, dd=D 及 dd=E 共用. 假如你想要用不同型式的數字, 就得自個兒設計 dash.gif, am.gif, pm.gif and colon.gif.

display=counter
timezone=X Specifies timezone. 請參考英文說明 None.
dformat=X 設定日期格式 這個參數用在display=date. 看你是要用哪種組合: MMDDYY (月-日-年). 如, dformat=ddmmyy, dformat=YYMMDD. dformat=MMDDYY
ft=X "框"的厚度 ft=0 表沒有"框", 當ft > 5, 會有不錯的 3-D 效果. ft=6
frgb=R;G;B "框"的顏色 把"框"的顏色用 RGB (red/green/blue) 表示. 如, frgb=255;255;255 表"白色", frgb=0;0;0 表"黑色". frgb=255;255;0 是"黃色", frgb=255;0;255 是"紫色". 若你想知道其他顏色到底是怎樣的RGB組成, 最好找個畫圖軟體 (如 Lview pro) 幫你忙. 假如你用 ft= 而沒有用 frgb= 參數, 就只能使用初始顏色.

假如你指示了 frgb= 卻沒有 ft=, "框"的厚度為 5. 你也可以用 16 進位來表示. 請參考 顏色名稱對映資料庫.

frgb=100;139;216 or
frgb=648bd8
tr=B 背景是否透明 You can specify if your counter image will have a transparent color with the Boolean B. So tr=Y means there will be a transparent color; and tr=N means there will not. It does not matter if the GIF files used for the digits are "transparent"; you must specify explicitly which color to make transparent. If you specify a trgb=, then you do not need to specify tr=Y. Valid values for B are Y, N, T, F, 1, or 0. tr=N
非透明
md=X Max Digits Defines maximum number of digits to display. Any value between 5 and 10 inclusive are permitted. Padding with leading zeros is automatically done for you; longer counts are truncated to the given X. md=6
Without padding
pad=B Padding with 0's Turn padding on/off in conjunction with md= setting. Valid values for the Boolean parameter B are Y, N, T, F, 1, or 0. pad=N
Without specification of a md=value

pad=Y
With specification of a md=value

dd=A Digit Directory Denotes directory of a specific styles of digits. Four styles of digits are suppiled. They are kept at the directories A,B,C and D respectively. Visit the digit mania page for other styles of digits. dd=A
My green led digits
st=X Start Count Used to set the initial value of the counter to some number X. This is only valid if you decided to allow automatic datafile creation. This is a bad practice to compile with this option, however it makes site maintaining easier. Note that this parameter has no effect if the datafile alreay exist. If you want to change the counter value in a existing datafile, hand edit the file. The minimum value for st is 1. st=1
Count starts at 1
sh=B Show digits Used to turn display of digits on or off according to the Boolean B. When sh=T, counter will be displayed and incremented, this is the default behavior.

If sh=F no digits will show, but the counter will still increment; instead of digits a transparent 1x1 GIF is displayed. Valid values for the Boolean parameter B are Y, N, T, F, 1, or 0

sh=Y
df=data_file Datafile to store count Specifies the name of the file for storing the count in. The file must be allocated to you as was mentioned in the "Authorizations" section above. You can use df=random to diaplay a random number.

One special use of the parameter is df=RANDOM. This returns a random number using the fractional portion of the host's time of day clock as a seed for the generator. Unlike all other WWWcounter parameters, the file name provided is case-sensitive, except for the value random. Or Random, or rANDOM, etc.

df=random
if no datafile is specified
incr=B Increment Count Makes it possible to display the current count without incrementing the count. This can be used to examine the count for reporting or other purposes without adding to the count. Valid values for the Boolean parameter B are Y, N, T, F, 1, or 0.

incr=T
Increment the counter on each invocation
lit=X Display literal Makes it possible to display a given, predetermined value. Valid values for the string X are digits. None
negate=B Negate the color Makes it possible to negate the color of the counter digits. Note that the Frame is exempted from negating. Valid values for the Boolean parameter B are Y, N, T, F, 1, or 0. negate=F
Do not negate
degrees=X Rotate X degrees Makes it possible to rotate the counter image X degree. The possible values of X is 90, 180, 270 and 360. Note 360 is meaningless as the counter will come back to the original 0 degree. degrees=270
With rotate=Y and without degrees=X
rotate 270 degreess clockwise
rotate=B 旋轉與否 請參考英文說明 rotate=F
Do not rotate
Count 2.0 example page